Mounting

• In wood or composite material from above the ceiling using height adjustable brackets or in plasterboard from below the ceiling using mounting frame to be separately ordered

Width

• 100 mm / 3.9”

Height

• Millwork: 45 mm / 1.8”. Plasterboard: 39 mm / 1.5” required depth ceiling cut out
• Millwork: 50 mm / 2”. Plasterboard: 45 mm / 1.8”
• Plasterboard: 110×110 mm / 4.3×4.3”.
• Lens: PMMA. Cap: polycarbonate
• LED array on printed circuit board.
• Remote power supply not included

Lamp wattage

• North America: 10W at 24V DC, 10W at 1050mA (symmetrical) or 9W at 900mA (asymmetrical).

Lamp lumens

• Symmetrical: 1015lm.
• Asymmetrical: 700lm

Delivered lumens

• Symmetrical: 640lm (20°) – 690lm (40°).
• Asymmetrical: 500lm

Beam

• 20°, 40° or asymmetrical reflector (downlight 25° and wallwasher)
• The asymmetrical reflector offers longitudinal cut-o£ and delivers homogeneous light from the upper edge of the wall to the floor with no visible dark zones

Color Temperature

• 2200K CRI90, 2700K CRI93, 3000K CRI93 or 4000K CRI93 / 3 step MacAdam ellipse
• Dimming options depend on power supply and additional control units to be separately ordered as